Thread 1
Thread 2

After some testing on my own to see what I could do to fix the problem I have come to the conclusion that there is some interference from the bluetooth connection and my Airport connection. After disabling my airport and using the wired connection for hours I have had no problems.

Apple, please get this issue resolved soon. I don’t like being all tangled up in wires.

UPDATE: Just wanted to give everyone an update on how I fixed the issue. I found that I have a new wireless network in my area now, which I believe was set to the same channel as my router. I went into my router settings and changed my wireless channel from 6 to 9 and applied the change. I haven’t had a problem since. Apple suggested that I buy a Airport basestation because it supports more then the 2.4GHz spectrum. This would also fix my problem, but for $200.

Most of the time it can be a nasty little bugger to get removed, and most anti-virus and anti-spyware software doesn’t remove or fix the problem. That is because the bug likes to hide using different techniques.

So today I wanted to share all the types of explorer.exe killers I have found, and how I fix the problem.

Before we begin:

I just want to say before I get started on letting you know how to fix this problem, is the trick to fixing this issue, has more to do with identifying which technique the bug is using, or if it even a bug at all. Explorer.exe can also start to do the same thing if an update didn’t take correctly. So, make sure that it wasn’t an update that killed off Explorer.exe first before assuming it’s a bug. If you think it was an update problem, I suggest reading this article.

The Killer Driver:

The first type of explorer.exe killer I find is simply a bug that installs a startup driver that kills that restarts the explorer.exe process any time it starts up. It is one of the easiest to spot, and is easy to fix. The first process is to find what drivers are being loaded, and which one it is that it is. What I recommend to do is to start up into safe mode (Reboot, hold F8, select Safe Mode). The reason we want to startup into safe mode is safe mode only starts the operating system with the minimum startup items, services, and drivers. So if we indeed do have a startup driver that is causing the issue, we should be able to login into Safe Mode and not have any explorer.exe problems.

First thing is to optimize the machine, so lets have you startup Msconfig. Go to Start > Run > Type in “msconfig” and hit enter.

In the window that appears choose the startup tab, and choose to disable all. Now go over the the “services” tab, and check the box to hide all non-microsoft services. Click “Apply” and hit “Ok”.

What we have done is cleaned out your startup and services, so if by chance the bug is one of those, we have stopped it from starting up, typically it isn’t going to do the trick, but will cover all our bases.

Now lets download a quick tool. Download link. This tool will allow us to see what drivers are currently loaded in Windows.

Reboot your system into Normal mode and run the program. Scroll through the list of drivers that are loaded, and see if you find any with any description or file type that is blank. If a driver has blank information, it may be the file we are looking for. Once you have found one, do a search for it, and delete the .sys file.

The .DLL File:

The majority of the time, this problem comes from a .DLL file. I would say about 90% of the machines I have worked on with this problem comes from a bad .dll file in hidden in the Windows or System32 directory. The technique I use to find the file we want to look for is a simple process as long as you have the right tools. First, we need a tool to help us watch system processes.

Go ahead and download Process Explorer. Process Explorer will allow you to watch system processes, and see what files, directories, etc they are calling for.

Once you have that up and running, make sure that you have the program running when explorer.exe is currently crashing and restarting. What you want to do is watch Process Explorer for the explorer.exe startup, and see if any other processes start up along side of it.

Typically what I see is explorer.exe starts up, then you have x process open up, and explorer.exe quits, and then x process quits. When x process starts up we want to hurry and take a look at what .dll files it is calling for. Once you have that info, go to the location of the file while being booted into a Live CD. and change the x.dll file to x.dll.bak. This way, if by changing the file messes up your system, you can go back and change it back to x.dll.

On the other hand, if it fixes the problem, you can go in and completely remove the file all together.

I know I didn’t get really to technical here and I apologize. If you have any questions or other techniques please leave a comment.

First, here’s a potentially easier way to share the screens of other Macs on your network. First, realize that the screen sharing feature is just an application. It resides in /System/Library/CoreServices, under the tricky name of Screen Sharing. Find it now, and drag it onto your Dock, or into your sidebar, or your toolbar—whichever you prefer for quick launch access.

Now you can launch Screen Sharing directly from the Finder, without first selecting a machine in the SHARED section of the sidebar. When you do, a dialog box appears onscreen, asking for the remote machine’s address. Great, you’re thinking, now I have to type in a machine’s IP address to connect to it? This is progress? No, not yet it’s not. Quit Screen Sharing if you launched it, switch to Terminal, and copy and paste this line:

defaults write com.apple.ScreenSharing ShowBonjourBrowser_Debug 1

Now launch Screen Sharing again, and revel in the new Bonjour Browser window that allows you to pick which machine you’d like to connect to from a list:

You can now pick your machines from a list of all Macs on the network. (And if there are any other Bonjour-compatible operating systems that support VNC (the technology behind screen sharing), I would expect they’d show up here as well, but I can’t test that assumption.) If you click the Add to My Computers box, the machine you connect to will be added to that section of the browser window, making future access a bit easier (think of it as a Favorites section).

Now that connecting is easier, let’s add even more functionality to the program. Again, quit Screen Sharing if it’s running, and then pop back into Terminal. If you’ve presently got a screen sharing session open, close it. Then copy and paste the following lines into Terminal, then press Return:

defaults write com.apple.ScreenSharing \
'NSToolbar Configuration ControlToolbar' -dict-add 'TB Item Identifiers' \
'(Scale,Control,Share,Curtain,Capture,FullScreen,GetClipboard,SendClipboard,Quality)'

That’s all one long line, so feel free to copy and paste directly to Termianl. When you launch Screen Sharing again, you’ll see six new buttons on your toolbar. (If you can’t see the toolbar, use View -> Show Toolbar to make it visible.)

So what do these new buttons do? Here’s a quick rundown on each.

Switch between controlling the remote Mac (the default) and simply observing the other machine.

Switch between allowing the remote Mac’s keyboard and mouse to be used (the default) and locking them out.

This button will lock the other Mac’s screen, displaying an all-black background, a huge lock icon, and the text you enter after clicking this button. Note that there’s a minor bug here; you’ll actually see the name of a variable that Apple left in the text field, too—so if you type “Using remotely,” the displayed message will be “Using remotelylockedByString.” This button is off by default, meaning the other Mac’s screen displays what you’re doing.

Click this button to capture the remote Mac’s screen to a local file. You’ll capture the full screen, and the system will ask you to pick a name and save location for the file.

Toggle between windowed (the default) and full screen modes. In full screen mode, the toolbar floats in the top left of the screen. To exit full screen mode, click the “X” button on the toolbar.

Not really a button at all, this is the quality slider. If you’re finding that screen updates are going slowly, for instance, you can reduce the quality—all the way down to a badly dithered black-and-white representation—to speed things up.

You might run into the occasional glitch with some of these features—like the extra text displayed in the lock screen mode—but for the most part, they work quite well. You can customize the toolbar as you would in any app, too. Feel free to use Command-drag to rearrange the icons, for instance. The only thing you can’t do is drag the default set back into the toolbar. If you do that, you’ll lose all your custom buttons. Obviously, that’s also the easiest way to undo this hint; just pick View -> Customize Toolbar, and then drag the default set up onto the toolbar. But after trying screen sharing with these new features, I have no intent to give up the added functionality!

The main thing to me is this new view in iTunes 7 called album view. In which a user can graphically scroll through album art to the chosen album and find your music. It is very sleek and sexy. The problem I encountered was that if you have a soundtrack that has multiple artists songs in the album, you get the same album over and over in they view only because iTunes recognizes that they have different artists. Come on APPLE! It is one album, I’m sorting by albums, SHOW ME THE ONE ALBUM. NOT 11 OF THE SAME STINKING ALBUM!

Now that I got that out of they way, gapless playback. I love this idea for gapless playback, its great to listen to songs with no gap and get the real feel the artist was going for.

I have also noticed, with other users, that when you login or off MSN, or you lose your internet connection, you music playing in the background suddenly stops, and a minute later resumes.

My last nudge with the release is when I play videos. When I play my TV shows (The Office for example) in a small window on my desktop, I lag out. The video is all stuttery and slow and the refresh rates are horrible. When I change over to full screen all is well. This has never happened before, why start now?

UPDATE: After reading some other bloggers post about there experiences (problems) with iTunes 7, I have come to realize that iTunes is using more memmory then it did in version 6. In version six I got about 20,000 K – 40,000 K Memm Usage, and now I get 144,000 K Memm Usage.

Here are some links to other bloggers issues.
-iTunes Memmory Hog
-Huge Problems with iTunes 7
-iTunes 7 Bug Discovery

So first things first, the install. So the install was easy, nice, simple, cleaner then previous versions of Windows where the wizard would nag with all these questions while you were eating your sandwich in the other room, only to find a half an hour later that you install isn’t done because it’s asking you a question. All in all much better then what it has been, but I think they could still improve.

After about an hour long install later (keep in mind I was putting this on a minimum requirement system, to see how well it works) I was in the GUI and feeling refreshed with this new, for Microsoft, eye candy feel. What I mean by that is that I feel the number one change from XP to Vista is the GUI, but all it is coping old Mac style.

Once logged in I saw so new features.

One, the “gadgets” bar. A sidebar that is modeled from Mac’s widgets idea, the only difference is that it is not as good as widgets, and it’s on a sidebar.

Two, menu bar has changed slightly, adding some new features to easily access different functions. I don’t really care to much for this “improvement”. I feel they are just moving things around to make it seem different, when it really isn’t. The address bar on the other hand I really do feel is an improvement. The basically changed it from a simple address location, to a tree. You still can enter addresses in the old way.

Three, the start menu is slightly setup better. I feel that access programs is a lot better now, because instead of hovering over the programs menu and getting a pop out menu, it replaces quick link area with the programs. So, if you’re running XP right now, open up your start menu and you see (depending on how you setup your start menu) 5 quick links of the programs you most use. When you hover over programs in Vista, that list is replaced with the list of programs. A well need improvement. The last thing in the start menu is that they added the search right to the menu, and again they changed searching over to the indexed system (again, building on old Mac technologies).

If you are a parent with children, and want better parental controls, I have to say, Vista does a fantastic job at the parental controls. You can use when users are able to log on to the computer. Meaning, if you don’t want “Timmy” (your twelve year old son) playing video games, or searching the internet at 2:00AM while you’re in bed, just disallow “Timmy” login at 2:00AM, etc. You can also change ratings for games, and disallow games to be played that have no rating. You can make it so “Timmy” can play “T” rated games, and “Sarah” (six years old) “E” rated games.

Overall these are the main features in my opinion that stood out to me. There is so much more, but I really don’t feel like typing about all of it. So let me sum up my feel on Vista.

Overall Vista is better then XP, when it’s finally released. The beta is still screwed up and I would say not to bother with it yet. Vista in my opinion is still XP, just some “new” stuff added on. All Microsoft has done is implemented old Mac technologies. Apple is pushing out everything new and Microsoft copies to the best of its abilities. Mac OS X put out spotlight, the indexed search, Microsoft added indexed search. Mac gave us widgets, Microsoft makes “gadgets”. Mac gave us the eye candy we all know and love, Microsoft tries to give us eye candy. Mac gives us security, Vista doesn’t.

So is Vista a buy or upgrade when it is finally released? Well the thing is that the only “good” version of Vista is to go all the way and get Ultimate, all the other editions are crappy and lacking key features. The key to all of it is purchase price. I simply say that if you have access to a genuine serial number of Vista Ultimate, upgrade, if you don’t, do not waste your money, stay with XP until you upgrade your machine and then get Vista, or at lease until you finally figure out Mac OS X is better.

Microsoft’s Windows Genuine Validation is basically code that is slipped onto your PC when you update Windows. If you have automatic updates on, it was even more hidden because Microsoft won’t tell you what they are putting on your computer until it’s there. Anyways…what it does is checks your version of Windows XP for a Genuine CD key. So if you have a pirated version of Windows XP on your computer, it is going to tell that your version isn’t genuine. If it isn’t a genuine version of Windows XP, you will not be able to receive any of the updates (like anyone does update anyways).

For those who just can’t find life without Windows updates (Ya, there are times you need them.) here is the newest, and updated way around it. This will also include the new update of Microsofts’ of making annoying reminders that are copies are not “genuine”.

How To: Turn off the annoying WGA reminders-

This is so simple that It makes me wonder why Microsoft did it in the first place. When you load into a user, you will recieve a bubble on your taskbar, along with a icon. When right clicked, you get a “Change Notifications Settings” menu choice. Click on it. It will take you to the Microsoft site, and you will be given a check box to turn off the reminders that you aren’t running a genuine version of windows.

Like I said simple.

How To: Get Windows Updates With Non-Genuine Version of Windows-

Well, the way to get around WGA has changed since October of 2005, but if you have been checking out the original post I made, you would notice it still gets alot of activity.

The fix is the same as in the recent comments. It is a registery fix, and I’ll let you in on it.

Instructions-

1- Go to the Windows Updates page, and download all updates including windows genuine valdiation.

(You will know that you are ready to move on to step two when you go back to the Windows Updates page again, click “custom” or “express”, and you recieve a page that notifies you that your version of Windows is not Genuine. If this happens move on to step two.)

2- Go to start, run, and type in regedit

3- Locate yourself to HKLM \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ policies \ EXT \ CLSID

(HKLM= HKEY LOCAL MACHINE)

4. There will be two files, one has no value, and the other one should be set to 1.
Change the file value data that is “1″ to “0″.
5. Open windows update.

6. Select which way you want to go (either custom or express) it doesn’t matter at this point.

7. You will be asked to reinstall the Validation tool. It now thinks you don’t have Windows Genuine Validation installed, but you do. DON’T CLICK THE BUTTON! DON’T CLOSE THE PAGE! DON’T REFRESH THE PAGE! Instead…put the registry data variable string that you deleted back in with a value of “1″. Once you have the value set back to “1″ close regedit and return back to your open Windows Update window.
8. Click back and then click the update method of choice (Custom or Express) and voila! It works!

Deleteing it completely. (Advanced)-
End the process wgatray.exe in Windows TaskManager and restart Windows XP in safe mode. Now delete the following files:

Delete WgaTray.exe from c:\windowss\ystem32
Delete WgaTray.exe from c:\windows\system32\dllcache

Start Windows Registry editor and delete the folder “WGALOGON” located in the following location:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ Windows NT\CurrentVersion\WinlogonNotify. Delete all references in your registry to WgaTray.exe

Another alternative suggest that three files are installed Windows XP System Folder:

\WINDOWS\system32\WgaLogon.dll
\WINDOWS\system32\WgaTray.exe
\WINDOWS\system32\LegitCheckControl.dll

The wgatray.exe process makes the check for genuine windows software. You can disable WGA by removing the execute bit on WgaLogon.dll. That way, winlogon can’t call it as a notification package at boot, and since WgaLogon is responsible for running and maintaining WgaTray.exe, no more tray popups either.

To change the execute bit of WgaLogon.dll, first turn off Simple File Sharing. Now right click the file in Windows Explorer and open the Security Tab. Hit the Advanced button, uncheck the Inherit box at the bottom, hit the Copy button, then hit OK. Go through each listed user/group and remove the “Read & Execute” permission for that file, leaving the “Read” permission as-is.

Hit OK to apply the permission changes and close the file properties dialog. Restart the machine. You can now turn “Use simple file sharing” back on, if you want.

A third alternative posted on the internet suggest that users clear the content of file data.dat located in the following directory:
C:\Documents and Settings\All Users\Application Data\Windows Genuine Advantage\data

Save the data.dat empty file and change the attributes to “Read Only” – Restart you computer. Or start your PC in Safe Mode and delete the following files from Windows system32 folder – wgalogon.dll spmgs.dll wgatray.exe The WGA setup file is in C:\WINDOWS\SoftwareDistribution\ Download\6c4788c9549d437e76e1773a7639582a

If you don’t use “Fast User Switching”, you can disable the Windows XP Welcome Screen if you are logged in as an Administrator. This will remove the initial WGA Warning Screen:

1. Click on Start -> Control Panel ->User Accounts
2. Click on “Change the way users log on or off”
3. Uncheck “Use the Welcome Screen” – Choose Apply
4. Close the User Accounts window and the Control Panel
5. The next time you reboot your computer, the classic login prompt will be used

I just want to report that I don’t believe the javascript code line in the address bar method works anymore. Neither can you disable WGA in your browser. That is basically what you are doing in the registery. You are making it seem like you didn’t have WGA, hence “0″, downloaded it and passed as genuine, hence the change to “1″.

I’m sure Microsoft will come out with more updates to WGA, and we’ll find ways around it. So if you have problems, just come check out this post comments and I’m sure will have the fix.

Also, you can download the new pirated version of Windows XP Pro SP2 that is out on torrent. That has a fix on it so it looks genuine to Windows all the time. I suggest if you are going to reformat, you download that image and use it on the reinstall.

Good luck my fellow Windows piraters!

Go to the K2 Reloaded site.

Two, I can’t fully forget Windows. My job requires me to know everything there is to know about all OS’s. I couldn’t possibly imagine not keeping up-to-date in Windows world.

I have changed my mind however. I have seen the signs, and I read them right. I had a feeling Apple would switch over to Intel, and soon I feel AMD will come into the picture too. There were signs that Apple was working on getting .exe’s and Windows working on there machines and its true, Windows works on the Intel macs, and they even put this out.

Windows on a Mac? Introducing the Boot Camp Public Beta

The next major release of Mac OS X, Leopard, will included a new feature called Boot Camp, which lets you install and run the Windows XP operating system on Intel-based Macs, like the new Mac mini and iMac. To experience this today, download the free Boot Camp Public Beta. Switching was never such an easy choice.

With the move to intel boards, it is my feeling that more and more of the good games, will come to the Mac. I also feel that Apple will soon put out something to match, even beat ActiveX.

With all of this, I have decided today that I am going to be ditching my PC, and I’m going to by a MacBook Pro. I don’t plan on buying it for two to three more months, and hopefully they will have Rev. 2 of the MacBook Pro out by then.

More people should follow in my steps

Do not fret though my fellow windows zombies, there is a tool that windows has added that is very secret. I have no clue why it is secret, cuz everyone should know this. Maybe its not a secret, but more of just not talked about, but anyways its called “taskkiller”.

The consecpt is easy enough, good into taskmanager, find the name of the task that won’t quit, and write it down. Then open up Notepad and type something like this

@echo off
taskkill/im NAMEOFTASK.exe /f

and save as a .bat (Batch file)
In place of the NAMEOFTASK type in what you wrote down earlier, and run the batch file, and ta da! Instant end of the task.

Hopes this helps some of you techs out there that have been emailing me

P.S. Incase you are wondering a breakdown of the code to get the meaning, here it is.

taskkill= the .exe that runs to kill the task
/im= the image name of the task to be killed
/f= to force the kill

http://eric-taylor.com/forums